Furniture Makeover

Faux Inlay Coffee Table

  • IMG_20160120_143359

I love bone inlay furniture. Words cannot express how deeply I desire a bone inlay dresser, or buffet, or table, or lamp, or tray, or box…you get the idea. Anything with bone inlay would be very welcome and I would make sure that the piece was very happy in my home. You know what I don’t love? The price. It’s not just sticker shock. Its heart palpitating, nauseating, ghostly pale face sticker coma. Needless to say, a true bone inlay piece is not in my budget.

Then my Mom discovered this coffee table at a garage sale for $5. It was stained, scratched, dinged, drawn on and scraped. In a word, perfect. For me, at least.

Supplies:

    • Coffee table
    • Apple & Barrel Antique White Acrylic Paint
    • Paint Brushes
    • Rags

Minwax Wood Stain Special Walnut
Minwax Satin Polycrylic

 

pixlr

Here it is in its original “glory”. Ouch. That’s what word comes to mind when you check out this table top. Ouch. It looked like it had been through a war. So let’s see what we can do to doll her up.

I began by sanding her smooth. I started with 80 grit and then moved up to 150 grit with my electric sander, a Christmas gift from by boyfriend Michael, that wonderful man. Until then my only option would be sanding by hand. This part took quite a while due to the fact that some of the scratches are quite deep. Around the edge I sanded by hand, but didn’t worry about getting every bit of old stain off at the edge, simply because I liked how it looked.

Next I began drawing out my design. I sketched this out on paper for the motif along the outside edge:

IMG_20160120_171434

Now, I could have used a stencil, but decided not to for a few reasons: 1) I wanted this to be all me and was not concerned with absolute perfection- I believe the imperfections add character, and 2) it was midnight when I started this and didn’t want to wait to order a stencil nor did I want to spend additional money on an inlay-like stencil.

After sketching out the motif, I shaded the back with the pencil. You could also use chalk. Then you flip it back over, position it, and trace over the design with a stylus or pencil and the graphite you shaded on the back will transfer your design onto the wood. Using a ruler and level, I sketched out the rest of the tabletop design.

IMG_20160104_191256

If you are having trouble envisioning what you want your design to be, I highly suggest hopping on the internet and checking out other inlay furniture. It can look really busy, like there is a lot going on, but most designs can be broken down. For example, a row of diamonds, then a row of dashes and dots, a row of chevrons, etc.  It’s your design. Do whatever you will like to do. If you want to use a pattern that’s not normal lay seen on inlay furniture, go for it. Who cares? Its not like the pattern police are going to be busting down your door. If you like it, then it’s right.

After that, it’s time to paint! I used Apple & Barrel Acrylic Paint Antique White. I bought a 2 oz bottle and used about 1/3 of it. Now, keep in mind that depending on the color of stain you use, the stain will darken this color. Not a lot, but it will tint it. If you want to keep it very white, you might want to use a bright white.

This part obviously took the longest. It took about 5 nights, working a couple of hours a night on it, between the kiddos bedtime and my own. I would position it at the end of my bed, glass of sparkling water in hand (peach), Castle reruns on the TV, and get busy. (We are big dorks around here and proud of it!)

IMG_20160104_191314

But finally I was done! Now, the most nerve racking part. I had already invested so much time into this table and was about to cover all my work with wood stain. Visions of the stain making the acrylic run, turn orange, cover the paint so dark you couldn’t see the pattern, a lot was going on in my head as I stirred the stain. (I used Minwax Wood Stain Special Walnut) Then I put on my big girl panties clenched my teeth, and made the first pass with the stain on a soft rag….

IMG_20160116_160537.jpg

Ta-Da! Just what I imagined. I was ecstatic. I dragged Michael in to see it, babbling at a high pitch and way too fast for any reasonable person to understand, that patient man. I wiped a thin coat of stain on with a soft rag, let it sit about 15 minutes, then buffed it with a clean rag. I found that if I rubbed the paint areas with a little pressure, I could wipe most of the stain off, keeping the paint pretty light. The stain barely tinted the paint with me buffing it, so it’s up to you and your aesthetic for what you want to do. I do recommend not rubbing the paint too vigorously. I noticed the paint started to rub off if I pushed hard. Also, the paint was barely tainted by the stain I used, but if you do decide to use a darker stain or one with red or orange in it, I would watch the paint closely to make sure it isn’t discolored. And here is the finished product. I applied two coats of stain, allowing 8 hours between coats, and three coats of polycrylic to seal it, so I don’t worry about the kids spilling something on it and staining the paint or rubbing it off when I need to wipe something up.

IMG_20160120_143022

IMG_20160120_142947

IMG_20160120_142900

And here is our cat, Spade. The coffee table won her seal of approval.

IMG_20160120_143359

Thanks for joining me on my first post on my blog. I hope you enjoyed it and it inspires you to try your own faux inlay. Many more to come!

Always,

P.S. Here are the fun parties I link to!

 

2 thoughts on “Faux Inlay Coffee Table

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s